Incorrect key file for table '/tmp/#sql151e8_2f778_7.MYI'; try to repair it
In order to minimize weld cost it is often prudent to make several welds with one stroke of the machine. If time is of the essence, this can be done with a dedicated machine design. Multiple cylinders would all operate at nearly the same time. Their timing is usually spaced slightly to reduce power demand. If multiple welds are in a modest space multiple cylinders may not fit. Then specialized multi spot equalizing holders might be the solution.
Do you have a question that is not covered in our knowledgebase? Do you have questions regarding the above article? Click here to ask the professor.